Find Isolating Switch, HV-Disconnect Switch, Electrical Switch on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > HV-Disconnect Switch > GW5-40.5 Series Outdoor AC high voltage isolation switch

GW5-40.5 Series Outdoor AC high voltage isolation switch

Basic Info

Model No.:  GW5-40.5

Product Description

Model NO.: GW5-40.5 Structure: Three-column Disconnector Operation: Manual Movement Mode: Vertical Rotary Type Grounding: Single Ground Run: Turn the Horizontal Structure of Operating: Manual Brand: Tianan Electirc Rated current(A): 1250 A Rated short duration: 4 s Specification: IEC Type: High-voltage Installation: Indoor High-voltage Grounding Mode: Grounding Number of Poles: Three Pole Series: Three Switching Mode: Single Throw-in Certification: ISO, IS9001, ISO9001, ISO9002 Rated voltage: 40.5 KV Rated peak withstand current(KA): 31.5 KA Trademark: Tianan Electric GW5-40.5 Series Outdoor AC high voltage isolation switch
 
1. Product Description
        GW5-40.5 Series outdoor high-voltage isolation switch is suitable for AC rated voltage 40.5KV, three-phase AC 50Hz outdoor isolating devices. With advanced design, reliable technical performance, simple structure, easy installation, etc., for high voltage lines in the no-load situation grafting. As well as being high voltage bus maintenance, circuit breakers and other electrical equipment and charged high voltage lines for electrical isolation. It can also be used to open, close small capacitance current or inductor current.
 
2. Structure Introduction
        GW5 Series outdoor high-voltage isolation switch is a double column horizontal rotary structure, the switch pole from the base, current loop and each composed of two post insulators. Within the base has a pair of bevel gears, along the respective axes to cook, the next move to adjust the status of two meshing gears; two post insulator V-shaped angle of 50 degrees; current loop at the upper end of the post insulator.
 
3. Type meaning
G W 5 - 40.5 / 0
GW: Outdoor AC Switch
5: Reference Design
40.5: Rated voltage
0 : Rated current
 
4. Isolation switch technical parameters
No. Parameters Unit Parameters
1 Rated voltage KV 40.5
2 Rated current A 630 1250
3 Disconnectors and grounding switches rated peak withstand current (peak) KA 50 80
4 Disconnectors and grounding switches rated short time withstand current 3s (RMS) KA 20 31.5
5 Isolating Switch main circuit resistance Ω =< 180 =< 100
6 1min Frequency withstand voltage (rms) Phase to earth KV 95
Isolation fracture KV 110
7 Rated lightning impulse withstand voltage (peak) Phase to earth KV 185
Isolation fracture KV 215
8 Phase center distance mm >= 1200
9 Isolation switch, grounding switch mechanical life time 2000
 
 5. Ordering Information
     Model The model number, name, rated voltage, rated current and is equipped with the actuator, the name, please indicate single or double ground when the ground with earth.
 

Contact us if you need more details on Isolation Switch. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Breaker、Electrical Switch. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : HV-Disconnect Switch

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters