Model No.: SFZ-40000/132
Model NO.: SFZ-40000/132
Cooling Method: Oil-immersed Type Transformer
Frequency Characteristics: Power Frequency
Origin: Ningbo, Zhejiang, China
Coil: Core-type Transformer
Winding Type: Two-winding Transformer
Usage: Power Transformer
Shape of Coil: Ring
Altitude: up to 1, 000m Above Sea Level
Special Conditions: Depends on The Customer
HS Code: 850423110
Our company is well recognized manufacturer, exporter and trader of premium quality assortment of Power Transformer in Ningbo, Zhejiang, China.
Rated voltage: 132kV
Rated capacity: 3500kVA-120000kVA
Frequency: 50Hz, 60Hz
Tapping range: +-8*1.25%
Vector group: Ynd11, Ynyn0d11
Cooling: ONAN, ONAF
Tap changer: OLTC, NLTC
On-load loss: low
No-load loss: low
220kv-230kv Low Noise Power Transformer
NINGBO TIANAN (GROUP) CO., LTD.
1. Product standards
>>GB1094.1 ~ 2-1996.
2. Low loss
- Optimization of electromagnetic calculations, using combined technology of electrical shielding and
magnetic circuit, effectively controlled leakage, so as to reduce the load loss and to avoid partial
- Use high quality cold-rolled lattice orientation high permeability silicon steel, to reduce the load loss,
- Core all-helical stacking with STEP joints, and advanced stacking process, reduced the load loss, load
current and electromagnetic noise.
3. Low partial discharge
To ensure the safe and steady operation of the transformer under continuous rated voltage, our Electric Power Research Institute conducted a lot of research to develop a more reasonable insulation structure, plus the strict technology specifications and technical staff experience, ensured the low partial discharge of our products.
4. High strength
- Adoption of six-side method positioning for the body, meets the transportation requirements of, horizontal acceleration not more than 0.3G, vertical direction not greater than 0.15g.
- Upper and Lower Clamps and the formation of tight fixed side beam frame.
- The tank can withstand the vacuum test and required positive pressure test.
5. Low Noise
- Use of high-quality core silicon steel;
- Core STEP stepping joints;
- Reduction of the flux density, despite of the increase of cost;
- Use low-noise fan as the air cooling equipment;
- Increase the shock absorbing measures;
- Well interior-protection, to avoid direct rigid contact of the body and tank;
Our company adopts the domestic leading technology, use fully enclosed structure for the transformer tank, ensuring product life of 30 years, and maintenance-free operation.
****For detailed technical specifications, please contact us.
Contact us if you need more details on Transformer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Power Transformer、Furnace Transformer. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Power Transformer