Find Filled Power Transformer Oil, Oil Power Transformer Oil, Petro Transformer Oil on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Power Transformer > Oil Filled Power Transformer Oil

Oil Filled Power Transformer Oil

Oil Filled Power Transformer Oil

Product Description

Oil Filled Power Transformer Oil

Transformer oil: It is a fractional distillation product of petroleum. Its main components are alkanes, cycloalkane saturated hydrocarbons, aromatic unsaturated hydrocarbons and other compounds. Commonly known as square shed oil, light yellow transparent liquid, relative density 0.895. Freezing point <-45 ℃.

Transformer oil is a kind of mineral oil obtained by distillation and refining from natural petroleum. It is a liquid natural hydrocarbon that is pure and stable, low viscosity, good insulation, and good cooling by acid-base refining of the lubricating oil fraction in petroleum. Mixture of compounds. Commonly known as square shed oil, light yellow transparent liquid.
The main function of transformer oil:
(1) Insulation: Transformer oil has much higher insulation strength than air. The insulation material is immersed in oil, which not only improves the insulation strength, but also protects it from moisture.
(2) Heat dissipation: Transformer oil has a large specific heat and is often used as a coolant. The heat generated during the operation of the transformer causes the oil close to the iron core and windings to expand due to heat. Through the upper and lower convection of the oil, the heat is dissipated through the radiator to ensure normal operation of the transformer.
(3) Arc suppression effect: On the on-load voltage regulating switch of oil Circuit Breaker and transformer, an arc will be generated when the contacts are switched. Because the transformer oil has good thermal conductivity, and can touch a large amount of gas under the high temperature of the arc, and generate a large pressure, the arc extinguishing performance of the medium is improved, and the arc is quickly extinguished.
The performance of transformer oil usually has the following requirements:
(1) The density of transformer oil should be as small as possible to facilitate precipitation of moisture and impurities in the oil.
(2) The viscosity should be moderate, too large will affect the convection heat dissipation, too small will reduce the flash point.
(3) The flash point should be as high as possible, and generally should not be lower than 136°C.
(4) The freezing point should be as low as possible.
(5) The lower the content of impurities such as acid, alkali, sulfur, and ash, the better, so as to avoid their corrosion to insulating materials, wires, fuel tanks, etc. as much as possible.
(6) The degree of oxidation should not be too high. The degree of oxidation is usually expressed by acid value, which refers to the amount of potassium hydroxide (mg) required to absorb the free acid in 1 gram of oil.
(7) Stability should not be too low. Stability is usually expressed by the sediment of the acid value test, which represents the ability of oil to resist aging
Quality indexedit
Appearance transparent, no suspended matter, sediment and mechanical impurities
Flash point (closed cup) ≥135℃
Kinematic viscosity (50℃) ≤9.6×10-6m2/s
Acid value ≤0.03mgKOH/g
Pour point <-22℃
1. The oil in the transformer mainly plays a role of heat dissipation and cooling during operation;
2. Insulate and maintain the windings (maintain good insulation);
3. The transformer oil acts as an arc extinguishing agent at the contact point of the tap switch at the high-voltage lead to prevent corona and arc discharge;
4. Transformer oil is widely used as a liquid seal in hydraulic safety valves.

Shandong New Materials Co., Yu Chi

 Shandong Yuchi Company wholesales gear oil, hydraulic oil, anti-rust oil, guideway oil, vacuum pump oil, air compressor oil, flushing oil, refrigerating machine oil, emulsified oil for hydraulic supports, high temperature chain oil cutting fluid, quenching oil, turbine oil.

Company Info

  • Company Name: Shandong New Materials Co., Yu Chi
  • Representative: Tao Dengyun
  • Product/Service: Industrial Lubricants , Automotive Lubricants , Engineering Machinery Lubricants , Industrial Special Oil , Gear Oil , Hydraulic Oil
  • Capital (Million US $): 10000000RMB
  • Year Established: 2019
  • Total Annual Sales Volume (Million US $): Above US$100 Million
  • Export Percentage: 11% - 20%
  • Total Annual Purchase Volume (Million US $): US$50 Million - US$100 Million
  • No. of Production Lines: 5
  • No. of R&D Staff: Fewer than 5 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: Inside the former Guohong Petrochemical Plant at the intersection of Chenguang Road and Lantian Road, Shilipu Street Industrial Park, Rencheng District
  • Contact Person: Ms. Jiang Hua
  • Tel: +86-0537-2102979
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters